Friday, September 25, 2015

Road Test Friday - Grumbacher Miskit Liquid Frisket

Hi everyone! Welcome to another Friday Road Test! We'll be giving our Road Testers new products to try out and reporting back the results and (hopefully) great experiences.

Today Deb from A Time to Stamp shows us how to use the masking fluid Grumbacher Miskit Liquid Frisket.




Grumbacher Miskit Liquid Frisket 559 is a fluorescent orange coloured frisket, for use on hard-sized watercolour papers, photos, and other media, to mask areas that are meant to be painted once the dried frisket is removed.

It washes out of pens and brushes with soap and water, and comes in a 1.2 oz (35 ml) glass jar. Make sure you clean your brush straight after using it, don’t leave your brushes to dry out.

This product contains latex.


Note: To assure longevity of this product, Grumbacher recommends storing the jar upside-down, with the cap securely closed.



Here is a tutorial on the project I made using the Liquid Frisket.

 1.  I stamped Tim Holtz Bird Crazy stamps on a sheet of white cardstock




  2.  I then applied the Liquid Frisket to the eyes and beaks of all the birds, using a fine paint brush. You have to be careful to stay within the lines of the eyes or whatever piece you are using it for. If you don’t keep in the lines and go past them it will show up later when you start to put on your background colour. The Liquid Frisket is orange in colour so is quite easy to see where you have put it.


  3. I can now apply colour to all the stamped birds, using Tim Holtz Distress Inks, sponged on with a dauber. As you can see by the photo there is no way you can sponge on the colour without getting it everywhere, this is why I love the Liquid Frisket




4. After adding the colour I then very gently rubbed on the birds eyes and beaks with my finger, until the Liquid Frisket starts to peel off. You have to be gentle otherwise you may peel off the cardstock as well. So gently does it! You can see on this picture where I went over the stamped line a tiny bit with the Liquid Frisket, it is easy to fix, just add more colour.









 5. Once I had peeled off all the Liquid Frisket I then started on my project. I love how the eyes turned out so white, it makes them really pop off the paper! Here are the projects I made using Tim Holtz’s Bird Crazy Stamp Set.





Supplies:
Tim Holtz Distress Ink Festive Berries, Worn Lipstick, Spun Sugar, Squeezed Lemonade, Crushed Olive, Dried Marigold, Shaded Lilac, Seedless Preserves, Dusty Concord, Tumbled Glass, Broken China, Peacock Feathers.
Tim Holtz Bird Crazy Stamp, Tim Holtz Stencils Stars, Honeycomb, Wild Flower
Various Tim Holtz Idea-ology
Claudine Helmuth Multi Medium Matte
Black Ranger Archival Ink




Wow! What a useful product and beautiful creations.
Check back with us later in the week, when we'll have a pictorial step-by-step from Deb on how to create that fabulous journal cover.
A big thank you to Deb for taking Miskit on the road for us.
Have a brilliant weekend!

Aunty Vera :)




Friday, September 18, 2015

Road Test Friday - Thermoweb Deco Foil

Hi everyone! Welcome to another Friday Road Test! We'll be giving our Road Testers new products to try out and reporting back the results and (hopefully) great experiences.

Today the Real Jenni brings us iCraft Deco Foil from Thermoweb.

Now, I have to admit, when I ordered in this product I had absolutely NO IDEA what it was! I know, I know.... I should know better, but hey - with so many new products on the market, it's hard to keep up with all the latest new goodies. But that's what my Road Testers are for! 

So what is Deco Foil? Basically it'a roll of foil transfer sheets that can be used with the Deco Foil transfer adhesive, or any other 'sticky' medium (such as double-sided tape) to add foil accents to your project. Jenni had a play with this super foil. Here is what she found........



"here is the Transfer Adhesive. It comes in a 61ml bottle and can be used on paper or fabric"



"The Deco Foils come in a great range of colours. Each tube holds five 6 x 12 inch sheets"



"Write anything you would like, draw a picture. or simply doodle, on cards, cardstock, wood - the posibilities are endless......"



"it's very important that the adhesive is dry when you apply the foil.
This time varies so much. When you first write with the pen, it goes on "smokey" looking.
Allow it to completely dry until it is clear....transparent.
 There is no set time for this as atmosphere and thickness play a big part
If you are organised I would leave it overnight before applying the foil

When you apply the foil I found it best NOT TO RUB,,,but to PRESS/DAB"






"this picture shows what happens if you rub it, and if the adhesive is not quite dry
...oooch"



"this is it dried and foiled with our favourite craft shop written"



"if you look closely at this picture,,,,you will see "Vera" in the sky,,,,,"





Now this product gets really exciting when you use it together with a printer and a laminator.
Print any picture in MONOCHROME using a LASER printer. This part is really important as it's the toner that acts as an adhesive when it is heated in your laminator.
Place a sheet of Deco Foil face up over your printed image.........


Than sandwich the print and foil inside a sheet of paper (this protects the foil when it goes through the laminator)........


Roll the paper sandwich through your laminator, leave it a minute to cool down, and simply peel off the foil sheet........



WOW!



Imagine the possibilities......




Jenni's verdict:

"All in all I found this product very versatile and fun.

the only fault I found with it was that the drying time of the transfer adhesive was quite long.
I think when I use the adhesive method, I will be leaving it overnight to dry

Very Happy with the results"



A big thank you to Jenni for showing us how simple and fun it is to use these fabulous foil transfer sheets.

Wishing you all a happy Friday..... and a brilliant weekend!
Aunty Vera :)








Related Posts Plugin for WordPress, Blogger...